Kingson Engineering — Steelwork Specialists
CallGet a price
A steel portal frame under erection on open ground: columns, rafters and purlins in place, a mobile crane working inside the frame and cladding already fixed to the far bays.
The cutting head of the DXTECH fibre laser close up, sparks off the nozzle and the cut line running out across the sheet.
A yellow telescopic mobile crane standing in a yard, boom raised, with lettering reading KINGSON and a phone number on the counterweight body.
Two Kingson Engineering workers welding a steel grating panel on the floor of the Harare workshop, seen from low down with the workshop roof trusses and sheeting above them.

Steelwork specialists · Tynwald, Harare

Structural steelwork. Fabricated here.

Structural steel, roofing, fibre laser cutting and cranage — fabricated in our own workshop and erected with our own crane. Send drawings or a description; enquiries are acknowledged the same working day.

Get a priceCallWhatsApp

01Six services

What do you need made?

Pick the one closest to your job. Each goes to a page with the full specification.

  1. Structural steelwork Made herefabricated at our Tynwald workshop Portal frames, columns, rafters and purlins — fabricated here in our own workshop and erected on site with our own crane.
  2. Roof steelwork and trusses Any spanand any height Trusses, purlins and sheeting for a roof of any span and height, new build or re-roof. IBR and corrugated profiles, cut to 12 m, galvanised or pre-painted.
  3. Fibre laser cutting 20 mmmaximum cutting thickness Plate and sheet up to 20 mm thick, cut on a DXTECH fibre laser straight from your file. Mild steel, stainless, aluminium and galvanised sheet.
  4. Balustrades and roller shutter doors 3 000 mmmaximum fold length Balustrading, handrails and roller shutter doors, fabricated to your opening and finish.
  5. General metal fabrication 4 metalsmild, galvanised, stainless, aluminium Sheet, plate and section work in mild steel, galvanised, stainless and aluminium — cut, folded and fabricated to drawing.
  6. Mobile cranage 25 ttelescopic mobile crane Our 25-tonne telescopic mobile crane, for lifting and placing steel — on our jobs or yours.

±0.1 MM

cutting tolerance, repeating to ± 0.03 mm

02Fibre laser

Straight from your file.

Plate and sheet cut on a DXTECH fibre laser — nested from the drawing you send and cut on a 3 000 × 1 500 mm bed. Mild steel, stainless, aluminium and galvanised sheet.

Mild steel
20 mm on oxygen
Stainless steel
10 mm on nitrogen
Aluminium
8 mm on nitrogen
Galvanised sheet
4 mm on nitrogen
Files accepted
DXF · DWG · STEP · PDF

Send a DXF, DWG, STEP or PDF with the material and thickness.

More on fibre laser

03The workshop

Tynwald IndustriesHarare

This is where the work happens.

One workshop at No. 1262 Tynwald Industries. The laser, the folder and the fabrication bays are under one roof, and the crane goes out from the same yard.

Open
Monday to Saturday, 07:30 – 17:00
Ask for
Mr Murandu
Get a price

04Mobile cranage

25 t

Telescopic mobile crane

Our 25-tonne telescopic mobile crane, for lifting and placing steel — on our jobs or yours.

More on cranage

05Specifications

The numbers we work to.

Every figure Kingson confirmed, by material and profile.

IBR sheeting
Cover width
686 mm, five ribs
Rib height / pitch
36 mm / 200 mm
Gauges stocked
0.47 · 0.53 · 0.58 mm
Minimum roof pitch
5°; 7° with side laps
Maximum purlin spacing
1 800 mm at 0.53 mm
Maximum sheet length
cut to 12 m
Finishes
galvanised or pre-painted
Corrugated sheeting
Cover width
762 mm, 10.5 corrugations
Crest height / pitch
17.5 mm / 76 mm
Gauges stocked
0.4 · 0.47 · 0.53 mm
Minimum roof pitch
10°; 12° exposed
Maximum purlin spacing
1 200 mm at 0.47 mm
Curving
from 6 m radius, sprung on site
Flashings and custom folding
Maximum fold length
3 000 mm
Material range
0.4 – 3.0 mm · mild steel, galvanised, stainless, aluminium
Standard items
ridge, barge, valley
Lead time
3 – 5 days on a stock gauge
Fibre laser
Machine
DXTECH
Bed size
3 000 × 1 500 mm
Mild steel
20 mm on oxygen
Stainless steel
10 mm on nitrogen
Aluminium
8 mm on nitrogen
Galvanised sheet
4 mm on nitrogen
Tolerance
± 0.1 mm, repeatability ± 0.03 mm
File formats accepted
DXF, DWG, STEP, PDF
Cranage and erection
Crane type
telescopic mobile
Lifting capacity
25 tonnes
Cranes
one
Erection area
Harare and nationally

06How it works

What happens after you send it.

Five things we hold to on every job. Not targets — what the office actually does.

  1. 01

    Enquiry acknowledged

    Same working day.

  2. 02

    Site visit arranged

    Within two working days, where the job needs one.

  3. 03

    Written quotation

    Within the week.

  4. 04

    Portal frame programme

    Six to ten weeks from order.

  5. 05

    Delivery outside Harare

    Nationally, with transport priced per load.

That is the whole sequence. It starts when you send the drawings.

Send us the brief

07Get a price

Send us the brief.

Tell us what you need. Enquiries are acknowledged the same working day.

Your enquiry is logged with Kingson when you send it. Drawings are not — there is no upload here. Attach your DXF, DWG, STEP or PDF to the WhatsApp or email message this page prepares and it reaches the same estimator.

Privacy: we ask about your business, not about you. What you send is saved in Kingson’s enquiry system (hosted by Supabase), seen only by Kingson staff, used to reply and quote, and never for marketing. To see or remove it, email admin1@kingsonengineering.co.zw. Visits are counted without cookies and without identifying you.

Ready to send.

08Questions

Questions we get asked

Not answered here?

Ask the workshop directly. Enquiries are acknowledged the same working day.

CallWhatsApp
How long does a quotation take?

Enquiries are acknowledged the same working day, and a written quotation follows within the week. Where the job needs someone on site first, the site visit is arranged within two working days.

How long does a steel structure take?

A portal frame programme runs six to ten weeks. A written quotation comes within the week of your enquiry, and a site visit is arranged within two working days where the job needs one.

How do I get a price?

Send drawings or a description by WhatsApp on +263 772 262 869, or email admin1@kingsonengineering.co.zw. Technical drawings can go to technical@kingsonengineering.co.zw. Enquiries are acknowledged the same working day.

Where is Kingson Engineering based?

Kingson Engineering trades as Kingson Trading (Pvt) Ltd and works from one workshop at No. 1262 Tynwald Industries, Harare, Zimbabwe. It is open Monday to Saturday, 07:30 to 17:00, and enquiries reach Mr Murandu.

What areas do you cover?

Harare, and nationally across Zimbabwe. Erection is covered nationally and delivery outside Harare is priced per load.

Can I get a price without drawings?

Yes. Send the measurements and a photograph of the site, or a description of what you need. Where the job needs someone on site, a site visit is arranged within two working days, and a written quotation follows within the week.

What can Kingson Engineering do?

Six things: structural steelwork, roof steelwork and trusses, fibre laser cutting, balustrades and roller shutter doors, general metal fabrication, and mobile cranage. All of it is fabricated at the Tynwald workshop and erected with Kingson’s own crane.

09Where to find us

Talk to us.

Call the workshop during working hours, or send a message any time.

No. 1262 Tynwald Industries, HarareGet directions